Fusion VMC Post Processor for Vertical Machining Centres
Fusion posts for vertical machining centres from global and Indian builders. We match the post to your VMC's controller, tool changer, spindle, coolant and options, including 4th-axis rotaries, probes and tool setters.
Same controller, different machine
Two VMCs with the same FANUC or Siemens control can still need different posts. Machine builders configure tool changers, spindle orientation, coolant options, M-codes, home positions and optional features differently. An arm-type tool changer behaves differently from a carousel, a through-spindle coolant option needs its own code, and a VMC with a 4th-axis rotary needs its own configuration.
ENGIMANDI builds VMC posts from your machine's actual specification: builder, model, controller version, tool changer type, spindle and coolant options, and any rotary or probing equipment. We cover VMCs from Haas, DMG MORI, Mazak, Doosan (DN Solutions), Hyundai WIA, Brother, Okuma, Makino and leading Indian builders such as BFW, Jyoti, Ace Micromatic, LMW and Macpower.
Read VMC post processor development.
What you get
- Builder-specific M-codes
- Tool changer sequence
- Spindle & coolant options
- Home & park positions
- 4th-axis rotary option
- Probe & tool setter support
- HSM mode for moulds
- Proven on your VMC
VMC post features
Matched to your machine, not just your controller.
Tool Changers
Arm, carousel and umbrella changers with correct preselection and sequence.
Coolant Options
Flood, mist, TSC, air blast and wash-down codes as fitted.
Rotary Option
4th-axis rotary tables added as a post option.
Probing
Spindle probe and tool setter cycles for setup and inspection.
High-Speed Modes
Smoothing modes for die and mould finishing.
Safe Positions
Home, tool change and park positions for easy loading.
VMCs we post for
Global and Indian builders.
Typical projects
- Indian VMC with FANUC 0i-MF Plus
- Haas VF-2 with HRT210 rotary and probe
- Brother Speedio tapping centre
- Makino die and mould VMC with HSM
- Mixed VMC fleet with one shop-standard post
- Siemens 828D VMC post for a job shop
How we deliver VMC posts
Machine
Builder, model, options and manual.
Samples
Programs that run well today.
Build
Post developed and tested.
Prove
First part with your operator.
Support
Adjustments and additions.
VMC post questions
Can one post support all our VMCs?
If they share a controller type, often yes, with properties selecting each machine's options.
Do you support Indian VMC builders?
Yes. We regularly build posts for BFW, Jyoti, Ace Micromatic, LMW and other Indian machines.
What if our VMC has a special tool changer?
We follow the builder's tool change macro and M-codes so the sequence is correct.
Can you add a 4th axis later?
Yes. A rotary option can be added to the post when you install one.
Do you support remote proving?
Yes. We support operators over video call during first runs.