Fagor CNC Post Processor Development

Fagor control families

Family	Notes
8055	Widely installed older generation, its own syntax for many functions
8060 / 8065 / 8070	Newer generation with `#` instructions for advanced functions

Posts for 8055 and 8065/8070 are not interchangeable; the syntax differs significantly for high-speed and multi-axis functions.

Common 8065/8070 instructions

#HSC ON [...] / #HSC OFF: high-speed machining mode.
#RTCP ON / #RTCP OFF: rotating tool centre point for 5-axis.
#CS / #ACS: coordinate system definitions for inclined planes.
G54–G59 and G159 for additional zero offsets.

Example output

; MOULD CAVITY OP20
T4 M6
G54
S12000 M3
G0 X0 Y0
G43 Z50 D4
#HSC ON [CONTERROR 0.01]
G1 Z-1 F1500
...
#HSC OFF
M30

Parameter names inside #HSC and tool length handling depend on control version and machine configuration; we confirm them from the machine's documentation and sample programs.

What we configure

Tool call and offset conventions used by the machine builder.
Drilling and tapping cycle formats.
Inclined plane and RTCP output for 5-axis machines.
Subprogram calls and comment formatting.

Fagor controls are capable and flexible, provided the post uses the right generation's syntax.

Fagor post development

See our CNC post processor development service and custom G-code for different controllers.

ENGIMANDI CNC Team

We develop, customise and commission CNC post processors for Fusion, NX CAM, Mastercam, SolidCAM and other CAM systems.