Fusion Fagor Post Processor for 8055, 8060, 8065 and 8070
Fagor controls combine ISO programming with their own high-level # instructions. We build Fusion posts for Fagor 8055, 8060, 8065 and 8070 on mills, lathes and 5-axis machines, using #HSC, #RTCP, #CS/#ACS and Fagor cycles correctly.
ISO plus Fagor's high-level instructions
Fagor controls are widely used in Europe, India and on retrofits. Newer Fagor controls such as the 8060, 8065 and 8070 accept ISO G-code, and add # instructions for advanced functions: #HSC for high-speed machining with contour error settings, #RTCP for tool centre point on 5-axis machines, #CS and #ACS for inclined plane coordinate systems, and kinematic selection. Additional zero offsets use G159, and Fagor cycles have their own parameter formats.
ENGIMANDI builds Fusion Fagor posts for your control model and software version. We output #HSC settings per operation, #RTCP for simultaneous work, #CS/#ACS for 3+2 positioning, correct G159 offsets, Fagor canned cycles, and lathe-specific formats on T-model controls. We confirm parameter names from your machine documentation and sample programs.
Read Fagor CNC post processor development.
What you get
- 8055, 8060, 8065 & 8070
- #HSC high-speed settings
- #RTCP for 5-axis
- #CS / #ACS inclined planes
- G159 zero offsets
- Fagor canned cycles
- Mill & lathe models
- Retrofit machine support
Fagor post features
Using Fagor's advanced functions.
#HSC
High-speed machining mode with contour error set per operation.
#RTCP
Tool centre point control for simultaneous 5-axis motion.
#CS / #ACS
Inclined coordinate systems for 3+2 machining.
Zero Offsets
G54-G59 and G159 additional offsets.
Cycles
Fagor drilling, tapping and boring cycles.
Retrofits
Posts for older machines retrofitted with Fagor controls.
Fagor controls we post for
Mill (M) and lathe (T) models.
Typical projects
- Fagor 8065 five-axis post with #RTCP
- Retrofitted mill with a Fagor 8060
- Fagor 8055 lathe post
- #HSC settings for mould finishing
- Inclined plane drilling with #CS
- Indian VMC with Fagor control
How we build Fagor posts
Identify
Model, version and kinematics.
Samples
Proven programs and manuals.
Build
Post with Fagor functions.
Prove
Machine trials.
Support
Ongoing help.
Fagor post questions
Do Fagor controls accept standard G-code?
Yes, ISO G-code works, and # instructions add advanced features such as high-speed and 5-axis functions.
Why do #HSC parameters vary?
Parameter names and options depend on the control version and machine setup. We confirm them from your documentation.
Do you support older Fagor 8055 controls?
Yes, with their specific formats and limits.
Can you post for retrofitted machines?
Yes. Retrofits with Fagor controls are common, and we match the post to the new control.
Do you support Fagor 5-axis kinematics?
Yes, using the kinematics configured in your control with #RTCP and inclined planes.