Fusion Siemens SINUMERIK Post Processor
Siemens SINUMERIK controls have powerful cycles and multi-axis functions. We build Fusion posts for 808D, 828D, 840D sl and SINUMERIK ONE that use them properly: CYCLE800, TRAORI, CYCLE832, Siemens drilling cycles, TRANSMIT and TRACYL.
Siemens-native code from Fusion
Siemens SINUMERIK programs look different from classic ISO G-code. Drilling and tapping use Siemens cycles such as CYCLE81, CYCLE83 and CYCLE84 with their own parameter lists. Tilted work planes use CYCLE800 with swivel data records, tool centre point uses TRAORI, high-speed settings use CYCLE832, and mill-turn functions use TRANSMIT and TRACYL. Tool calls, frames and program structure also follow Siemens conventions.
ENGIMANDI builds Fusion SINUMERIK posts that output native Siemens code for your control and machine configuration: correct cycle parameters for your software version, CYCLE800 with the right swivel data and retract modes, TRAORI with orientation settings for simultaneous work, CYCLE832 tolerances per operation, and ShopMill or ShopTurn-friendly structure where operators prefer it.
Read Siemens SINUMERIK post processor development.
What you get
- 808D, 828D, 840D sl & ONE
- Siemens drilling & tapping cycles
- CYCLE800 swivel planes
- TRAORI for 5-axis
- CYCLE832 high-speed settings
- TRANSMIT & TRACYL
- Siemens tool call style
- Version-correct parameters
SINUMERIK post features
Native Siemens functions, used correctly.
Siemens Cycles
CYCLE81-89 and thread milling cycles with version-correct parameters.
CYCLE800
Swivel planes with swivel data records and safe retract modes.
TRAORI
Orientation transformation for simultaneous 5-axis machining.
CYCLE832
High-speed settings with tolerance per roughing and finishing.
TRANSMIT / TRACYL
Face and cylinder machining on mill-turn machines.
Program Style
Siemens tool calls, frames and comments operators expect.
SINUMERIK controls we post for
Milling and turning.
Typical projects
- DMG MORI DMU trunnion with 840D sl
- 828D VMC post for a mould shop
- SINUMERIK ONE five-axis with TRAORI
- 808D lathe post for training institutes
- Mill-turn post with TRANSMIT and TRACYL
- Siemens drilling cycles replacing expanded code
How we build SINUMERIK posts
Identify
Control, software version and options.
Configure
Swivel data and kinematics.
Build
Siemens-native post.
Prove
Trials on your machine.
Support
Ongoing help.
SINUMERIK post questions
Can SINUMERIK run ISO G-code instead?
Many Siemens controls have an ISO dialect mode, but native Siemens code gives access to cycles and multi-axis functions. We recommend native output.
Why do cycle parameters differ between machines?
Siemens cycle parameter lists changed between software versions. We match your version exactly.
Do we need swivel data configured on the machine?
Yes, for CYCLE800. The machine builder usually sets it up; we align the post with it.
Can operators still edit programs in ShopMill?
Posted G-code programs run in Sinumerik Operate. We keep programs readable for operators.
Do you support the 808D?
Yes, with its reduced function set in mind.